Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 11)

8
CONNECTING THE HDKVM
EXTRA LONG RANGE EXTENDER
How to Connect the HDKVM Extra Long Range Extender
1. Connect the Hi-Def source to the Sender Unit using the included HDMI cable.
2. Use an HDMI cable to connect the Receiver Unit to an HDTV display.
3. Connect the USB host device to the Sender Unit.
4. Connect the USB devices to the Receiver Unit.
5. Connect the Ethernet port on the Sender Unit to the network.
6. Connect the Ethernet port on the Receiver Unit to the Ethernet (LAN) port on
the display device.
7. Connect CAT-5e or CAT-6 cables between the Link ports on the Sender Unit
and the Link ports on the Receiver Unit.
NOTE: If terminating network cables in the fi eld, please adhere to the
TIA/EIA568B specifi cation (see page 12).
9. Connect the 5 V DC locking power supplies to the Sender Unit and Receiver
Unit. Do not overtighten the locking connectors. Plug the two (2) AC power
cords from the power supplies to available electrical outlets.