GE 00025467 User Manual
Page 28
8
Switching Between Speakerphone and Handset
You can switch between speakerphone and handset after dialing a number, or any
time during a conversation.
Speaker to Cordless/Corded Handset — Press TALK/CALL BACK on handset, and
then press
speaker/call back on the base. Or lift the corded handset when using
speaker phone. Speak into the cordless/corded handset.
Corded/Cordless Handset to Speaker — Press speaker/call back, then hang up the
handset. Speak into the Speakerphone.
Conference the External Caller with Cordless
Handset and Base
The handset or the base can enter conference directly by pressing
TALK/CALL BACK
button on the handset or
speaker/call back button on the base while the other party
(handset or base) is on the external line.
Memory
The cordless handset and base each have their own separate memory storage areas.
Store ten 15-character names and 4-digit telephone numbers in the handset and
base memories.
Storing a Name and Number in Memory
1. Press the
memory button on base or mem/conference button on handset.
. Press the desired memory location button (0 through 9 number keys) or use the
caller id (9 or :) button on the base or the CALLER ID-VOLUME (6 or 5) button
on the handset to scroll to the desired location. If the memory location is occupied,
the stored name and number displays. If the memory location is unoccupied,
EMPTY shows in the display.
3. Press the
memory button on the base or the mem/conference button on the
handset. The display shows
ENTER NAME.