GE Monogram MONOGRAM ZCG3100 - Manual (Page 6)

6
Tools required:
• #2 Phillips head screwdriver
• Flat blade screwdriver
• Tape measure
• Spirit level
• 10" long 2x4
• Adjustable wrench or slip
joint pliers
• Drill and 1/8" drill bit
Parts List:
• 4 leveling feet caps
• 4 Phillips head screws
• 2 Slotted head screws
• 2 Tip-over brackets
• 2 90° clips
Optional Materials
(not supplied):
• Custom front panel
• Custom handle
• Custom toekick board
• 5 wood screws
Installation
Built-In Compactors
Technical
data Electric Power—120V, 60 HZ, 5 amp
Circuit Requirement—15 or 20 amp grounded outlet
Motor Horsepower—1/3
Compacting Force—5000# max. Container volume—1.4 cu. ft.
Weight—135 lbs.
Cycle Time—70 sec. max., 12 sec. min.
Choosing
the
location This compactor is designed as a built-in appliance
only. It may be located in any convenient space under
a countertop. DO NOT OPERATE FREE-STANDING
because the compactor will tip over when the drawer
is pulled out.