Gifts that Bloom PM0070-0C - Manual (Page 2)

COPYRIGHT

1996 MERIT INDUSTRIES, INC.
PM0070-0C MEGATOUCH SUPER IV MANUAL 1
Game Description
The Megatouch video game comes housed
in a 13” countertop cabinet, a 19” upright cabinet or a
19” cabaret cabinet.
The countertop and upright models have 3 key-locked
compartments: the CPU section, the coin mech section
and the coin box. The cabaret model has 4 key-locked
sections: the CPU, coin mech & coin box sections, as
well as a locked rear monitor door. The countertop is
equipped with one coin mech and the cabaret model
has two; optional bill acceptors are available for the
cabaret.
CPU Section
The CPU section is accessible from the rear of the unit
in the countertop and upright versions. It houses the
CRT, the monitor controls, the CPU (CRT-260), the
power supply and the main harness. In the cabaret
model, the CPU section is located at the bottom of the
front side of the unit and contains only the CPU and
power supply (monitor controls for the cabaret version
are located in the coin mech section).
•
The CRT-260 is the “brains” of the machine.
Located on the board are the program option
EPROMs, the DIP switch, the volume control dial
and the Dallas security key.
•
The main harness is used to connect the CPU
board to the power supply, the CRT controls and
the CRT monitor.
Coin Mech/Coin Box Section
13” Countertop
The coin mech/coin box section is accessible from the
front of the unit. This section is key-locked for security
purposes. A sturdy metal box, located within the coin
mech section, holds all coins deposited into the
machine. The coin box is separately key-locked for
security.
Also located within the cavity of the coin mech are 2
internal switches, ”SETUP” and “CALIBRATE,” and the
coin meter. Location of these switches can be seen in
Figure 4. Pressing the “SETUP” button will bring you to
the Megatouch Setup screen (see Figure 1). See the
next section for calibration instructions.
19” Cabaret/19” Upright
The coin mech and coin box are accessible from the
front of the cabinet. Both doors are key-locked for
security purposes.
Also located within the cavity of the coin mech are 2
internal switches, ”SETUP” and “CALIBRATE,” and the
coin meter. Location of these switches can be seen in
Figures 6 and 9. Pressing the “SETUP” button will bring
you to the Megatouch Setup screen (see Figure 1). See
the next section for calibration instructions.
The monitor controls for the cabaret cabinet can be
found “Velcroed” to the bottom of the cabinet in the
coin mech section.
Screen Calibration
The machine must be in the idle mode or game select
mode to calibrate the touchscreen.
•
Find the “CALIBRATE” button located behind the
coin mech and press it to enter the screen
calibration mode.
•
Touch the center of the first circle that appears on
the screen. Once touched, a second circle will
appear on the screen.
NOTE: YOU MUST HOLD YOUR FINGER ON THE CIRCLE FOR
APPROXIMATELY 2 SECONDS FOR THE
CALIBRATION TO BE RECOGNIZED.
•
Touch the center of the second circle that appears
on the screen.