Grizzly G9986 - Manual (Page 11)

Model G9986 8" Drill Press
-9-
The Model G9986 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
SECTION 3: SET UP
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Degreaser ........................................... Varies
• Hammer or Mallet ....................................... 1
• Block of Wood ............................................ 1
• Wrench 13mm ............................................ 1
Items Needed for
Set Up
After all the parts have been removed from the
two boxes, you should have the following items:
Description Qty
A. Headstock .................................................. 1
B. Table .......................................................... 1
C. Swivel Handle ............................................. 1
D. Column ....................................................... 1
E. Base ........................................................... 1
F. Hex Bolts M8-1.25 x 20 .............................. 3
G. Flat Washers 8mm ..................................... 3
H. Chuck ......................................................... 1
I. Chuck Key .................................................. 1
J. Adjustment Wrench .................................... 1
K. Downfeed Handles ..................................... 3
L. Hex Wrenches 3, 4mm ......................1 Each
Inventory
Figure 4. G9986 Inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
A
D
E
B
K
H I
J
L
F, G
C