GIGABYTE GN-MD01 - Manual (Page 6)

GN-MD01 AirCruiser G Game Adapter
Status LEDs
LED’s
Please see the table below for a description of the LEDs:
Label Activity Description
Power On (Green)
Off
On (Orange)
Unit is receiving power and functioning
Unit is not receiving power
Unit is receiving power but not functioning
Q-Link On (Green)
Blink
Blink OFF
On (Red)
Q-link button is activated
Devices are engaging in auto-link
Auto-linking is complete
Auto-linking failed
WLAN On (Green)
Blink
Wireless link is connected
Data is being transmitted wirelessly
LAN On (Green)
Blink
LAN port has detected a link with a 10/100 Mbps device
Data is being transmitted
Side View
Q-Link Button
If you have more than one AirCruiser G Game Adapter, you can press the Q-Link button to enable the
AirCruiser G Game Adapters to link to each other automatically.
However, you can only use Q-Link function in the following situations:
1.
All AirCruiser G Game Adapters are in Ad-Hoc mode
2. One device is in Access Point mode and the other devices are in Ethernet Adapter mode.
Mode Switch
Set the device in either Access Point mode, Ad-Hoc mode or Ethernet Adapter mode.
3