Vehicle seat belts – Graco ISPB008BC 1/03 User Manual

Page 30

Text mode
Original mode

(fig. c)

Combination Lap/Shoulder Belt

with Sliding Latch Plate

Pull

VEHICLE SEAT BELTS

(continued)

With Harness System:

Pull on latch plate (fig. c). If belt slides freely
through latch plate, a locking clip MUST be
used. (See “Locking Clip”section, page 29.)

Without Harness System:

This vehicle seat belt system is OK to use with
booster car seat.

Movement of the seat belt through the latch
plate can allow an active toddler to slide down
in car seat and re-position lap belt over
abdomen and shoulder belt over neck or face
which is dangerous.

A Locking Clip may be used on this type of
vehicle seat belt to prevent movement of seat
belt through latch plate limiting toddler’s
movement: (see page 29).