Graco ISPB008BC 1/03 - Manual (Page 18)

16
Harness Straps:
• To tighten: Pull belt tab (fig. a).
• To loosen: Lift lever on front of car seat
while pulling harness straps (fig. b).
Harness Clip:
• To open: Press tabs in and pull apart
(fig. c).
• To close: Snap halves together. Make
sure harness clip is locked by pulling out
on each half.
Buckle:
• To lock: Insert both tongues into buckle.
Pull up on tongues to be sure they are
locked.
• To unlock: Press red button and pull
tongues out of buckle.
1
2
3
4
OPERATIONS and ADJUSTMENTS
Tether Strap (fig. d):
• To tighten: Pull loose end of strap.
• To loosen: Lift adjuster