Grandstream Networks GXV3611 - Manual (Page 25)

GXV3611 Mini IP Dome Camera
Firmware 1.0.4.6 Page 25 of 34
Grandstream Networks, Inc. 09/2010
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3611 FTP Page
The FTP server is used to store video files if you configure the GXV3611 to record video and
upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you
want the GXV3611 to upload the recorded video
to the FTP server when an alarm is triggered, set
this field to “Yes.”
FTP Server – The IP address or hostname of
the SMTP server, ie. ftp.myserver.com.
FTP Server Port – The port that your FTP
server is using.
User Name / Password – The user name and
password required to log into your FTP server
Path – The directory in the FTP server where recorded video will be uploaded.
Test FTP Account Settings – Click the Test button to upload a sample file to make sure that
FTP is properly configured.
GXV3611 Alarm Event Page
The GXV3611 supports alarm inputs, for example, infrared detector, smoke detector and so
on.
Follow the steps to make Alarm Input work:
1. Connect alarm input equipment to the GXV3611.
2. Set up the alarm event time schedule.
3. Configure the alarm actions which you would like the GXV3611 to take when alarm is
triggered.
Note: The smoke detector in the GXV 3611 mini dome camera is not intended to replace
any smoke detector alarm system. The smoke detector does not comply with the National
Alarm and Signaling Code, nor does it provide any form of visual or audible signal to alert
the premises dwellers. You must not replace any existing smoke alarm system with this
product.