Grandstream Networks GXV3611 User Manual

Page 24

GXV3611 Mini IP Dome Camera

Firmware 1.0.4.6 Page 24 of 34
Grandstream Networks, Inc. 09/2010

Automatic Upgrade – The default setting is “No.” Choose “Yes” to enable automatic.

HTTP/HTTPS/TFTP upgrade and provisioning. When set to “No”, the IP Camera will only

perform a HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the

boot process.

Performing a firmware upgrade:

1. Download the firmware package from http://www.grandstream.com/firmware.html.

2. Unzip the firmware package and copy the files to the firmware upgrade server

directory.

Upgrades are supported via TFTP, HTTP and HTTPS.

3. Log in to the Maintenance page of the GXV3611. Select the server type from the

dropdown list under the “Upgrade Via” field. Enter your server’s root directory in the

“Firmware Server Path” field.

4. Reboot the GXV3611 to begin the firmware upgrade process.

GXV3611 SMTP Page

The SMTP server is used to send out emails when an alarm event or motion detection is

triggered. The SMTP settings must be configured to make sure the alarm email is sent out

properly.

SMTP Server Settings

Enable SMTP – Checked to enable SMTP

SMTP Server – The IP or hostname of the

SMTP server, for example,

smtp.gmail.com.

SMTP Server Port – The port of the

SMTP server. The GXV3611 supports port

25 and SSL port 465, which is for SMTP

with an encrypted connection.
From E-Mail Address – The email

address that sends out the alarm email(s).

To E-Mail Address – The email

addresses that the alarm email(s) will be

sent to. You can have up to 3 emails

configured.

User Name/ Password – The user name

and password required to log in to your

SMTP server, for example,

SSL – Checked if the SMTP server requires a secure connection.