Global Machinery Company Sierra 1999 - Manual (Page 388)

Scheduled Maintenance -- Gasoline Engines
yellow blue
7-12
60,000 Miles (100 000 km) (Continued)
j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote +.)
j Inspect engine accessory drive belt.
An Emission Control Service.
j Replace fuel filter.
An Emission Control Service. (See footnote
[.)
j Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket
for any damage. Replace parts as needed.
An Emission Control Service. (See footnote
[.)
j Inspect Exhaust Gas Recirculation (EGR) system as described in the
service manual.
An Emission Control Service. (See footnote
[.)
j Inspect Evaporative Control System. Check all fuel and vapor lines and hoses
for proper hook - up, routing and condition. Check that the purge valve works
properly, if equipped. Replace as needed.
An Emission Control Service. (See footnote
[.)
67,500 Miles (112 500 km)
j Check Oil Life Monitor. If engine oil and filter are changed, reset monitor.
See “Engine Oil” in the Index.
An Emission Control Service. (See footnote *.)
ACTUAL
SERVICED BY:
MILEAGE
DATE