beautypg.com

Care of your cassette tape player – Global Machinery Company Sierra 1999 User Manual

Page 187

background image

yellow

blue

3-27

Care of Your Cassette Tape Player

A tape player that is not cleaned regularly can cause
reduced sound quality, ruined cassettes or a damaged
mechanism. Cassette tapes should be stored in their
cases away from contaminants, direct sunlight and
extreme heat. If they aren’t, they may not operate
properly or may cause failure of the tape player.

Your tape player should be cleaned regularly after every
50 hours of use. Your radio may display CLN to indicate
that you have used your tape player for 50 hours without
resetting the tape clean timer. If this message appears on
the display, your cassette tape player needs to be
cleaned. It will still play tapes, but you should clean it as
soon as possible to prevent damage to your tapes and
player. If you notice a reduction in sound quality, try a
known good cassette to see if it is the tape or the tape
player at fault. If this other cassette has no improvement
in sound quality, clean the tape player.

The recommended cleaning method for your cassette
tape player is the use of a scrubbing action,
non

-

abrasive cleaning cassette with pads which scrub

the tape head as the hubs of the cleaner cassette turn.
The recommended cleaning cassette is available through
your dealership (GM Part No. 12344789).

When using a scrubbing action, non

-

abrasive cleaning

cassette, it is normal for the cassette to eject because
your unit is equipped with a cut tape detection feature
and a cleaning cassette may appear as a broken tape. To
prevent the cleaning cassette from being ejected, use the
following steps.

If your vehicle is equipped with the AM

-

FM Stereo with

Cassette Tape Player:

1. Turn the ignition to RUN or ACCESSORY.

2. Turn the radio on.

3. Insert the scrubbing action cleaning cassette.

4. Within five seconds, press and hold the REV and

FWD buttons at the same time for three seconds. The
tape symbol on the display will flash, showing that
the cut tape detection feature is no longer active.

5. Eject the cleaning cassette after the manufacturer’s

recommended cleaning time.