English, Appendix - 73 – GIGABYTE AMD Socket AM2 Processor Motherboard GA-M55SLI-S4 User Manual

Page 73

Appendix

- 73 -

English

Step 2:
If you do not create RAID, select Hard Disk Boot Priority under the Advanced BIOS Features
menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which
you wish to install Microsoft Windows 2000/XP. You should see a screen similar to Figure 2 below.

Figure 2

Hard Disk Boot Priority

1. CH2 M. :

ST3120026AS

2. CH3 M. :

ST3120026AS

3. Bootable Add-in Cards

: Move

PU/PD/+/-: Change Priority

F10: Save

ESC: Exit

Item Help
Menu Level

Use < > or < > to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
to exit this
menu.

If you wish to create RAID, configure the RAID array in RAID BIOS (refer to Section 3) first. After finished,
re-enter the system BIOS Setup to set hard disk boot priority before OS installation. Select Hard Disk
Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu,
select the RAID array onto which you wish to install Microsoft Windows 2000/XP. You should see a
screen similar to Figure 3 below.

Figure 3