GE 25880 - Manual (Page 28)

28
Dialing a Stored Number
Handset: Make sure the phone is ON by pressing the talk/end/call back
button on the cordless handset.
1. Press the memory/conference button.
2. Press the desired memory location button (0-9). The stored telephone
number dials automatically.
-Or-
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory/conference button.
3. Press the desired memory location button (0-9), or use the caller ID/vol
(- or +) button to scroll to the desired telephone number.
4. Press the talk/end/call back button. The stored telephone number
dials automatically.
Base: Press the speaker/call back button, or lift the corded handset.
1. Press the memory/conference button.
2. Press the desired memory location (0-9). The number dials automatically.
-Or-
1. Make sure the phone is OFF (not in talk mode).
2. Press the memory/conference button.
3. Press the desired memory location button (0-9), or use the caller ID (rev
or skip) button to scroll to the desired telephone number.
4. Press the speaker/call back button. The number dials automatically.
Chain Dialing from Memory
Use this feature to make calls that require a sequence of numbers, such as
a frequently used long distance card number. The following example shows
how you can store each part of the long dialing sequence and use chain
dialing to make a call through a long distance service provider: