Grizzly H8216 - Manual (Page 5)

Model H8216 1 /
4
" Angle Die Grinder -3 -
INTRODUCTION
H8216 Inventory Qty
A. Machine Oil Bottle..............................1
B.
1 /
4
" Angle Die Grinder.........................1
C. 1 /
4
" NPT Male Quick Connect Fitting..1
D. Wrench 12mm....................................1
E. Wrench 17mm....................................1
Collet Size............................................... 1 ⁄
4
"
No Load Speed.......................20,000 RPM
Air Consumption...............................3 CFM
Air Inlet..................................................... 1 ⁄
4
"
Required PSI.....................................90 PSI
Maximum Sound Level......................94 dB
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model H8216 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Inventory
Figure 1. Model H8216 Inventory.
A
B
C
D
E