Grandstream Networks Grandstream GXV-3000 - Manual (Page 33)

GXV-3000 User Manual
Grandstream Networks, Inc.
- 33 -
Via HTTP
Server The URL for the HTTP server used for firmware upgrade and configuration via
HTTP. For example,
http://provisioning.mycompany.com:6688/Grandstream/1.0.0.33
Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be
omitted if using default port 80.
Note: If Auto Upgrade is set to No, GXV-3000 will only do HTTP download once
at boot up.
Automatic
Upgrade Default is No. Choose Yes to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to enable the phone
to check the HTTP server for firmware upgrade or configuration changes in the de-
fined period of time.
When set to No, the phone will only do HTTP upgrade and configuration check once
at boot up. Used by ITSP. End user should NOT touch these parameters.
DTMF Pay-
load Type This parameter sets the payload type for DTMF using RFC2833. Default is 101.
Syslog Server The IP address or URL of System log server. This feature is especially useful for
ITSP (Internet Telephone Service Provider)