Grandstream Networks 496 - Manual (Page 16)

HandTone-496 User Manual Grandstream Networks, Inc.
16
NAT/DHCP Server Information & Configuration:
Cloned WAN MAC Addr:
(in hex format)
LAN Subnet Mask:
255.255.255.0
(default is 255.255.255.0)
LAN DHCP Base IP:
192.168.2.1
(base IP for the LAN port, default is 192.168.2.1)
DHCP IP Lease Time:
120
(in units of hours, default is 120 hours or 5 days)
DMZ IP:
Port Forwarding:
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
Update
All Rights Reserved Grandstream Networks, Inc. 2004
End User
Password This contains the password to access the Web Configuration Menu. This
field is case sensitive.
IP Address There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
Time Zone This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.