Grizzly H8210 - Manual (Page 5)

Model H8210 10 Piece Air Hammer Kit -3 -
INTRODUCTION
Specifications
Bit Size....................................10mm ( 13 /
32
")
Bore Diameter.......................................... 3 /
4
"
Blows Per Minute.......................4,500 BPM
Air Consumption...............................5 CFM
Air Inlet.....................................................
1 /
4
"
Required PSI.....................................90 PSI
Maximum Sound Level.....................108 dB
Weight...................................................4 lbs
A
B
C
D
E
Model H8210 Inventory Qty
A. Case....................................................1
B. Bits ..................................................... 5
C. Air Gun ............................................... 1
D. Retainer Spring .................................. 1
E.
1 /
4
" NPT Male Quick Connect Fitting 1
F. Oil Bottle ............................................ 1
No list of safety guidelines can be complete. Every shop environment is different.
Always consider safety first, as it applies to your individual working conditions.
Use this air hammer and other machinery with caution and respect. Failure to do
so could result in serious personal injury, damage to equipment, or poor work
results.
F
Figure 1. H8210 Inventory
Foreword
The specifications, details, and
photographs in this manual represent
the Model H8210 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com