Grundig 400 PE - Manual (Page 7)

6
GENERAL RADIO OPERATION
HOW TO TURN THE RADIO ON AND OFF
Press the ON/OFF button.
HOW TO LISTEN TO YOUR LOCAL AM STATIONS
1. On the YB 400PE, the AM broadcast band is called
medium wave. When you are listening to AM, the letters
“MW” appear in the display.
2. Press the ON/OFF button to turn the radio on.
3. Press the AM button several times, until MW appears
near the center of the display.
4. If “STEP” appears in the display, press the STEP button
to choose 10 KHz tuning rate.
5. Automatically tune using the AUTO TUNING button.
The radio will automatically stop on stations. A quick
press-and-release tunes up-frequency; a long press-and-
release tunes down-frequency.
6. Manually tune using the tuning button.
HOW TO USE THYE WIDE/NARROW SWITCH (left side
of radio)
Experiment with this switch and let your ears be your guide.
WIDE gives the best audio fidelity; NARROW best minimizes
interference from other nearby stations. This switch is used for
AM, shortwave, and longwave listening.
HOW TO LISTEN TO YOUR LOCAL FM STATIONS
1. Press the FM Button.
2. Automatically tune using the AUTO TUNING button.
The radio will automatically stop on stations. A quick
press-and-release tunes up-frequency; a long press-
and-release tunes down-frequency.
3. Manually tune using the TUNING BUTTONS.