GE 25982 - Manual (Page 30)

30
Reviewing, Changing or Deleting Stored
Names/Numbers
To Review: Press mem/conference button on the handset or memory/conf button
on base, then press the caller id (9 or :) button (on base) or the CALLER ID-VOLUME
(6 or 5) button (on cordless handset) to scroll through the stored numbers. Or press
the memory location number.
To Change: Follow the steps under Storing a Name and Number in Memory except
replace the stored name or number with the new information.
To Delete: Press mem/conference button on the handset or memory/conf button on
base, then press the caller id (9 or :) button (on base) or the CALLER ID-VOLUME
(6 or 5) button (on cordless handset) to scroll to a desired memory.
1. While the entry displays, press
delete button on base or chan/delete button on
handset to mark the entry for deletion. The display shows DELETE?
. Press delete button on base or chan/delete button on handset again to delete the
entry. **DELETED** is displayed.
Dialing a Stored Number
Handset: Make sure the phone is ON by pressing the TALK/CALL BACK or SPEAKER
button on the cordless handset.
1. Press the
mem/conference button.
. Press the desired memory location button (0-9). The stored telephone number
dials automatically.
-Or-
1. Make sure the phone is OFF (not in TALK mode).
. Press the mem/conference button.
3. Press the desired memory location button (0-9), or use the CALLER ID-VOLUME (6
or 5) button to scroll to the desired telephone number.
4. Press the TALK/CALL BACK or SPEAKER button. The stored telephone number dials
automatically.
Base: Press the speaker/call back button, or lift the corded handset.
1. Press the
memory/conf button.
. Press the desired memory location (0-9). The number dials automatically.