GE 25982 - Manual (Page 21)

1
Default Setting
NOTE: This setting may be made with the base or the cordless
handset.
1. Press the menu/flash button on base or mute/menu button on handset until
DEFAULT SETTING or DEFAULT shows in the display. NO is the default setting.
. Use the touch-tone pad to select 1YES or 2NO, or press the caller id (9 or :)
button on the base or CALLER ID-VOLUME (6 or 5) button on the handset to
scroll to 1YES or 2NO.
NOTE: If you choose YES all settings in the programmable menu
return to factory defaults except day and time.
3. Press the menu/flash button on base or mute/menu button on handset again to
store your selection.
Basic Operation
Answering a Call
Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
Cordless Handset
1. Press the TALK/CALL BACK or SPEAKER button on the handset.
. When finished, press TALK/CALL BACK or SPEAKER button or place the handset in
charging cradle to hang up.
Corded Handset
1. Lift the handset.
. When finished, put the handset back on the cradle to hang up.
Base Speakerphone
1. Press the speaker/call back button.
. When finished, press speaker/call back to hang up.
NOTE: For more information, refer to "Base Unit Speakerphone
Operation" section of this manual.