Grizzly G8749 - Manual (Page 9)

G8749 Drum/Flap Sander -7-
Site Considerations
Make your shop “child safe”. Ensure that
your workplace is inaccessible to young-
sters by closing and locking all entrances
when you are away. Never allow visitors in
your shop when assembling, adjusting or
operating equipment.
WORKING CLEARANCES
Working clearances can be thought of as the dis-
tances between machines and obstacles that
allow safe operation of every machine without lim-
itation. Consider existing and anticipated machine
needs, size of material to be processed through
each machine, and space for auxiliary stands
and/or work tables. Also consider the relative
position of each machine to one another for effi-
cient material handling. Be sure to allow yourself
sufficient room to safely run your machines in any
foreseeable operation.
LIGHTING AND OUTLETS
Lighting should be bright enough to eliminate
shadow and prevent eye strain. Electrical circuits
should be dedicated or large enough to handle
combined motor amp loads. Outlets should be
located near each machine so power or extension
cords are not obstructing high-traffic areas. Be
sure to observe local electrical codes for proper
installation of new lighting, outlets, or circuits.
Unpacking
The Drum/Flap Sander is shipped from the facto-
ry in a carefully packed carton. If you find the
machine to be damaged after you’ve signed for
delivery and the truck and driver are already
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for inspection by the carrier or their agent.
Without the packing materials, filing a freight
claim can be difficult. If you need advice regarding
this situation, please call us.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory its
parts.
Piece Inventory
With all the parts removed from the container, you
should have the components listed below:
• Motor Assembly
• 5
3 ⁄
4
" x 8" Sanding Drum and Sleeve
• 3 1 ⁄
4
" x 8" Sanding Drum and Sleeve
• 6" x 10" Flap Sanding Assembly
• Mounting Shafts and Washers (3)
• End Caps (2)
If anything is missing, call or write to the Service
Department listed in the General Information sec-
tion. If anything is damaged, please follow the
procedures described above.
NOTICE
Please keep all packaging materials until
you are satisfied that the machine is in good
condition. Should you need to file a freight
claim, the carrier’s agent will require
inspection of those materials. Settling a
claim can be difficult if packaging is not
available.