GE 25982xx3 - Manual (Page 35)

35
NOTE: If the phone company does not supply all ten digits of an
incoming caller’s number, you will not be allowed to adjust the
format of that number.
Scroll to the number you want to call back:
3. If the number does not dial as shown, press the format button on base or format/
trans button on cordless handset. Repeat if necessary, until the correct number of
digits show in the display.
4. Press the TALK/CALL BACK or SPEAKER button on handset or speaker/call back
button on base. The number dials automatically.
NOTE: If you find it necessary to dial all local calls with the area
codes included press menu/flash button on base or mute/menu on
handset until SET AREA CODE appears, then enter 000 or you can
also leave the default setting of "---".
If the number is corrupted, such as a number in a name or an alphabetical
character in a number, an error tone comes from the handset and the number
won’t dial.
Deleting the Current Caller ID Record
To delete only the record in the display:
1. Use the caller id (9 or :) button (on base) or CALLER ID-VOLUME (6 or 5) button
(cordless handset) to display the desired Caller ID record.
. Press delete button on base or chan/delete button on cordless handset. The
display shows DELETE?.
3. Press delete button on base or chan/delete button on cordless handset again to
erase the record.
The display shows **DELETED**, confirming the deletion.
Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1. Use the caller id (9 or :) button (on base) or CALLER ID-VOLUME (6 or 5) button
(on cordless handset) to display any Caller ID record.
. Press and hold delete button on base or chan/delete button on cordless handset.
The display shows DELETE ALL? .
3. Press delete button on base or chan/delete button on cordless handset again to
erase all records. The display shows NO CALLS. You will hear a confirmation tone.