Installation to the vehicle – Graco 8H98 User Manual

Page 17

4 The shoulder harness MUST lay across child’s shoulders according to height

(Fig. 9)

The position of shoulder harness MUST be set slightly above child’s shoul-

ders.

Installation to the Vehicle

(Rear Facing Mode, for child under 13 kg)

Note that this mode must ONLY be used for child weighing under 13 kg (ap-

proximately 1 year old or under)

(Fig. 11)

DO NOT install on vehicle seat equipped with safety airbags

(Fig. 12)

It is highly recommended to have your car seat installed at the back seats of
your vehicle.

Note that you MUST adjust the car seat to the most reclining angle, or an-
gle 5, in rearfacing Mode. (Turn to

page 16

for adjustment details)

Both top bar and inner cushion MUST be installed in rearfacing mode.

1 Attach the inner cushions to the seat (including the Head Pad, Seat Pad, and

Protective Crotch Strap)

• Inner cushion is designed to provide extra protection and comfort for infant

under

• Child under

MUST use this car seat with inner cushions

(Fig. 13)

• The inner cushion is removable for washing.

Fig. 13.1

Protective crotch strap

Fig. 13.2

Head pad

Make sure to adjust the shoulder harness to the appropriate height when us-
ing the inner cushions. (Turn to

page 16

for adjustment details)

2 Use of top bar

(Fig. 14)

Note that the insertion is directional.

Do not use the top bar as a lifting handle.

3 Buckle the vehicle seat belt

(Fig.15)

4 Installation of vehicle seat belts

(Fig.16)

6 months old .

6 months