English – GIGABYTE GA-7VA1004 User Manual

Page 67

Technical Reference

- 61 -

English

STEP 6: Load BIOS defaults.

Normally the system redetects all devices after BIOS has been upgraded. Therefore, we
highly recommend reloading the BIOS defaults after B IOS has been upgraded. This
important step resets everything after the flash.

(1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up

screen will indicate your motherboard model and current B IOS version.

(2) Don't forget to press key to enter BIOS setup again when system is boot up. Use the

arrows to highlight the item "LOAD SETUP DE FAULTS" then press "Enter". System will ask
"Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

STANDARD CMOS SETUP

INTEGRATED PERIPHERALS

BIOS FEATURES SETUP

HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP

SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP

USER PASSWORD

PNP / PCI CONFIGURATION

IDE HDD AUTO DETECTION

LOAD BIOS DEFAULTS

SAVE & EXIT SETUP

LOAD SETUP DEFAULTS

EXIT WITHOUT SAVING

ESC: Quit

hifg : Select Item

(Shift)F2 : Change Color

F5: Old Values

F6: Load BIOS Defaults

F7: Load Setup Defaults F10:Sav e & Ex it

Load Setup Defaults

Load Setup Defaults? (Y/N)?N