Connections, Video system – GE X500 User Manual
Page 72
69
The video output signal can be switched to NTSC or PAL to
DFFRPPRGDWHGLȖHUHQWUHJLRQDOVWDQGDUGV7KHDSSURSULDWH
setting will vary between regions.
NTSC:
USA, Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
Note:
The TV output will not display properly if an incorrect
video system is selected.
Use this feature to switch the video system from either NTSC
or PAL.
1. Select Video System in the Transmission menu, then
press Right.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the
EXWWRQWRFRQ½UP
Video System
CONNECTIONS