English – GIGABYTE GA-945PLM-(D)S2 User Manual

Page 68

Text mode
Original mode

GA-945PLM-(D)S2 (rev. 2.1) Motherboard

- 68 -

English

STEP 3:
Connect a speaker or headphone to the rear Line
Out jack, a small window will pop up and ask you
what type of equipment is connected. Choose
Headphone or Line Out depending on the device
connected and click OK. The 2-channel audio setup
is completed.

STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 2CH Speaker.

Setting Up 4-Channel Audio

STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.