GoVideo DP5030 - Manual (Page 8)

8
Connections
A/V IN
OR
S-VIDEO
IN
TV Connections
Battery Connections
Charging the Battery
• Attach the supplied 7.4V Li-ION battery pack to the back of the portable DVD player as shown.
• Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC IN 12V jack on the left
side of the player.
• Turn off the player. The battery pack will NOT charge while the portable DVD
player is powered on.
• The red “Batt Chrg.” light will glow while the battery pack is
charging and will turn green when fully charged. Allow
several hours to charge the battery pack.
• When fully charged the battery will last ~2.5
hours.
Removing the Battery
• Press the PUSH button to remove the battery pack.
Standard AV Connections
• Connect the supplied audio/video cable
(mini-plug to RCA) from the AV OUT jack
to the Audio/Video Inputs on our
television.
• Slide the AV OUT/AV IN switch to the AV
OUT position.
S-Video Connections
• For improved picture quality connect an
S-Video cable with mini-plug adapter
(not included) from the S-VIDEO jack to
the S-Video input on your television.
• See “Amplifier/Receiver Connections” on
page 9 for audio options.
• Slide the AV OUT/AV IN switch to the AV
OUT position.
CAUTION
• Use specified charger only.
• May explode if battery is incorrectly replaced or
disposed of in fire.
• Do not short circuit.
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Do not place the battery pack under direct
sunlight or in excessively ot places (over 60° C
(140° F)) such as the dashboard of cars.
• Only use with the specific power adapter by
manufacturer (12VDC, 1.66A).
• The battery pack is not charged while the DVD
player is turned on.