GoVideo DP5030 - Manual (Page 24)

24
Audio Output [DVD]
The portable DVD player provides two types of audio output:
•
2-channel stereo sound, and
• Digital Audio Out
1 Press SETUP in Stop mode.
2 Press / to select “AUDIO SETUP”, then press PLAY/SEL.
3 Press / to select “OUTPUT”, then press PLAY/SEL.
4 Press / to select your preferred Audio Output setting.
5 Press PLAY/SEL.
NOTE:
•
The digital audio output jack (labeled “COAXIAL”) is used to output the digital audio signal recorded on DVD discs to an external
amplifier. If you set “OUTPUT” to “DIGITAL” in the SETUP MENU the signal will be output in its original format (e.g., Dolby Digital).
WARNING:
•
Do not set “AUDIO SETUP” to “DIGITAL” unless you are connecting an A/V decoder with Dolby Digital (AC-3) decoding function.
• High volume sound may damage your hearing as well as the speakers.
To return the screen to the SETUP MENU
Select “RETURN” and then press PLAY/SEL.
To exit the SETUP MENU
Press SETUP or select "EXIT" on the SETUP MENU screen.
Audio Setup