Grizzly G4227 - Manual (Page 17)

-16- G4227 Sliding Table
SECTION 5: MAINTENANCE
Lubrication
Your sliding table is equipped with shielded and
pre-lubricated ball bearings that require no lubri-
cation for the life of the bearings. All bearings are
common sizes and are readily available from a
local bearing supply house or through the Grizzly
Industrial parts department. Make a habit of inspecting your sliding table each
time you use it. Check for loose bolts. Vacuuming
the sliding table clean after every use ensures
that sawdust won't trap moisture against bare
metal surfaces. Clean the upper rollers, lower
rollers and the guide rails with steel wool about
every 6 months to prevent excessive pitch build
up.
General