Grizzly H3257 - Manual (Page 7)

Model H3256/H3257 Spray Gun -7 -
We are proud to offer the Grizzly Model
H3256/H3257 Spray Gun. These models
are part of a growing Grizzly family of fine
pneumatic tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation, and proof of Grizzly’s commit-
ment to customer satisfaction.
It is our pleasure to provide this manual
with the Model H3256/H3257. It was writ-
ten to encourage safety considerations
and guide you through general operating
procedures and maintenance.
The specifications, details, and pho-
tographs in this manual represent the
Model H3256/H3257 as supplied when the
manual was prepared. However, owing
to Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly.
SECTION 2: INTRODUCTION
Foreword Contact Information
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.