Gardena 7875 - Manual (Page 5)

G
21
G
20
Operation
The connected devices can now be controlled remotely using the
Radio Remote Control Unit.
Press either the corresponding On key to switch your device on or
the Off key to switch your device off.
x Press one of the left keys:
➞ The connected device is switched on.
x Press one of the right keys:
➞ The connected device is switched off.
You can use the Master keys (On and Off) to switch all Radio
Remote Control Sockets assigned to this Radio Remote Control
Unit on and off simultaneously.
x Press the left master key (On):
➞ The connected devices are switched on.
x Press the right master key (Off):
➞ The connected devices are switched off.
Note:
You must hold down the Remote Control keys for at least
1 second to ensure that the activation/deactivation pulses are
transmitted correctly.
Operating Connected
Devices
x Note:
➞ You can assign additional GARDENA Radio Remote Control
Units to this Radio Remote Control Socket within 10 seconds.
You can assign as many Radio Remote Control Sockets to one
key of the Radio Remote Control Unit as you like.
➞ If you make a mistake, remove the Radio Remote Control
Socket from the 230 W AC socket. (This Radio Remote Control
Socket can no longer be controlled remotely.)
➞ We recommend you make a list of the individual assignments.
x Connect the mains plug of one of your devices
(e. g. GARDENA Floating Lights or GARDENA Indoor Fountain
Pumps) to the GARDENA Radio Remote Control Socket.
You can assign the remaining keys of the GARDENA Radio Remote
Control Units to the GARDENA Radio Remote Control Sockets as
described above.
Note:
Installing Remote Control Sockets near to sheet metal walls
(in particular corrugated iron or sheets with trapezoidal
corrugations, e.g. garage doors) will impair proper functioning
considerably.