Advanced functions, Flash time, Modify pin – Geemarc AMPLIDECT 350 User Manual
Page 61
60
Flash Time
You can select to change the Flash time by the
following steps:
1. Press the Menu soft key.
2. Press
or
key to choose BS Settings,
then press the Select soft key.
3. Use
or
key to choose Flash Time menu.
Press the Select soft key.
4. The display shows the current setting. Use the
or
key to select Flash-1(100ms:UK and
European countries) /Flash-2(300ms:France), press
the Save soft key.
Modify PIN
This function allows you to change the PIN number of the
currently active Base. The default PIN is 0000.
1. Press the Menu soft key.
2. Press
or
key to choose BS Settings,
then press the Select soft key.
3. Use
or
key to choose Modify PIN menu,
press the Select soft key.
ADVANCED FUNCTIONS