Geemarc AMPLIDECT 350 - Manual (Page 22)

21
Turning Handset On/Off
If the handset is in power off mode, when you place the
handset on the base, it automatically turns on. To turn
the handset on or off in standby mode, follow these
steps:
1. To turn on the handset when it's off, press and hold the
key until you switch the display on. On power up,
the handset will enter subscription mode and search for a
registered base. A message as shown below will be
displayed to the user, and the signal icon will flash.
Searching...
2. To turn off the handset, keep the key pressed
until the display disappears.
If the handset is successful in finding a base, the handset
will enter the standby mode, the display will show
handset number and the handset name (if you have one
saved as described on page 37), signal icon, battery icon
and current time. If the handset is unsuccessful in finding
a base, the handset will behave according to the Out of
Range condition.
HANDSET SETTINGS