Basic functions, Making a call – Geemarc AMPLIDECT 350 User Manual

Page 24

Text mode
Original mode

All descriptions in this manual assume that the handset is
in standby mode. Set the telephone to standby mode by

pressing the

key.

Making a Call

1. Pick up the handset and press the

key.

Result: The In use indicator flashes and the

icon

appears on the LCD.
2. Dial a telephone number.

3. To end the call, either press the

key or replace

the handset on the base.

Note: To make a call to the last number you dialed, use the
Redial feature. For details, see page 29.

You can enter the desired phone number in standby
mode, which allows you to make corrections before
dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits). Check it.

You can also use the

key to insert a pause.

Note: If you make a mistake while entering a number,
press the Erase soft key to clear the last digit.

2. When the number appears correctly, press the

key.

BASIC FUNCTIONS