Graco 258906 - Manual (Page 24)

Flow Control Adjust Potentiometer
24 3A0246C
4. Replace control panel (37) and tighten bottom two
screws (61). Torque to 30-35 in-lb.
5. Connect display connector (A) to motor control
board (24).
6. Install cover (33k) with four screws (33b). Torque to
30-35 in-lb. Make sure tabs on noise shield are
routed inside the control box when assembling.
ti15795a
37
61
A
24
ti13569a
33b
33k
ti15786a