Graham Field GRAFCO 14423-8 - Manual (Page 26)

14423-INS-LAB-RevD11 26
s
NOTICE: Keep the Pocket Doppler and its environ-
ment clean and dust-free. Protect the device from vi-
bration, corrosive medicine, and high temperatures.
s
NOTICE: Do not use high-temperature sterilizing pro-
cess, low temperature steam, E-beam, and/or gamma
radiation sterilization on this device or its accesso-
ries.
CLEANING
WARNING: Before cleaning the Pocket Doppler or
probes, turn the Pocket Doppler power off and re-
move the battery.
s
NOTICE: Do not use strong solvent such as acetone
to clean Pocket Doppler or probe.
s
NOTICE: Do not use an abrasive such as steel wool
or metal polish to clean Pocket Doppler or probe.
s
NOTICE: Do not allow any liquid to enter the probe
socket while cleaning the Pocket Doppler or probe.
Cleaning the Pocket Doppler
s
NOTICE: Do not immerse Pocket Doppler. Do not al-
low liquid to enter the ultrasound system.
s
NOTICE: Do not pour liquids on the Pocket Doppler
while cleaning.
1. Keep the exterior surface of the Pocket Doppler clean
and free of dust and dirt.
2. Clean the exterior surface of the unit with a clean, dry,
nonabrasive cloth.
3. If necessary, clean the unit with a clean cloth dampened
with soap and water, then immediately wipe dry with a
clean, dry, non-abrasive cloth.
s
NOTICE: Do not allow any liquid or cleaning solution
to remain on the surface of the Pocket Doppler or
probe after cleaning.