GIGABYTE GA-K8N51PVMT-9-RH - Manual (Page 44)

GA-K8N51PVMT-9-RH Motherboard - 44 -
English
2-7 Frequency/Voltage Control
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Frequency
200.0~300.0MHz Set CPU Frequency from 200MHz to 300MHz.
PCIE Clock
100~145MHz Set PCIE Clock from 100MHz to 145MHz.
K8 CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
Display Output
This feature allows you to set signal output from the D-Sub(VGA) or S-Video(TV) port.
RGB Set signal output from the D-Sub port. (Default value)
TV Set signal output from the S-Video port.
AUTO The signal will output from S-Video if you connect the output device to the S-Video
port. If there is no output device on the S-Video port, the signal will output from D-Sub.
TV Mode Support
Select the TV system, the options include: NTSC-M, NTSC-J, PAL-M, PAL-BDGHI, PAL-N and
PAL-NC.
Disabled Disable this function. (Default value)
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Frequency/Voltage Control
CPU Frequency [200.0]
PCIE Clock [100Mhz]
K8 CPU Clock Ratio [Default]
Display Output [RGB]
TV Mode Support [Disabled]
Robust Graphics Booster [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`