Grizzly H7671 - Manual (Page 3)

Model h7671/h7672 hVlp spray gun -1 -
section 1: safety
safety instructions for pneumatic tools
1. Keep all safety devices in
place and in working order.
2. remove adJusting Keys and
Wrenches. Form habit of check-
ing to see that keys and adjusting
wrenches are removed from tool
before operation.
3. Keep WorK area clean.
Cluttered areas and benches invite
accidents.
4. do not use in dangerous
environment. do not use pneu-
matic tools in damp or wet loca-
tions, or where any flammable or
noxious fumes may exist. Keep
work area well lighted.
5. Keep children and visitors
aWay. all children and visitors
should be kept at a safe distance
from work area.
6. maKe WorKshop child
proof by locking your shop and
shutting off air valves.
7. do not force tool. it will do
the job better and safer at the rate
for which it was designed.
8. use the right tool. do not
force tool or attachment to do a job
for which it was not designed.
9. do not use under the
influence of drugs or
alcohol.
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates an imminent hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment. NOTICE