Grizzly G7948 - Manual (Page 2)

The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2 Model G7948
Other Related Information
Base Length............................................................................................................................................... 23 in.
Base Width...........................................................................................................................................17-1/2 in.
Quill Diameter........................................................................................................................................2.825 in.
Depth Stop Type...........................................................................................................................................Hub
Column Diameter.................................................................................................................................. 3.642 in.
Mobile Base..............................................................................................................................................G7314
Illumination....................................................................................................................... 110V Socket, Separat
Spindle Information
Spindle Taper.............................................................................................................................................MT#4
Spindle Travel........................................................................................................................................ 4-3/4 in.
Dist From Spindle To Column.................................................................................................................... 10 in.
Dist From Spindle To Table................................................................................................................. 28-1/2 in.
Dist From Spindle To Base.................................................................................................................. 50-1/4 in.
Table Information
Table Length........................................................................................................................................ 18-3/4 in.
Table Width.......................................................................................................................................... 16-3/4 in.
Table Thickness..................................................................................................................................... 1-1/2 in.
Floor To Table Height......................................................................................................................... 25 - 47 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swing.......................................................................................................................................... 360 deg.
Table Tilt.......................................................................................................................... Left and Right 90 deg.
Table Swivel Around Center................................................................................................................. 270 deg.
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table.......................................................................................................... 22 in.
No. Of T Slots....................................................................................................................................................3
T Slot Width...............................................................................................................................................1/2 in.
T Slot Length........................................................................................................................................14-1/2 in.
Operation Information
Swing..........................................................................................................................................................20 in.
Drilling Capacity........................................................................................................................ 1-1/4 in. in Steel
No Of Spindle Speeds.....................................................................................................................................12
Range Of Spindle Speeds................210, 310, 400, 440, 630, 670, 1260, 1430, 1650, 2050, 2350, 3300 RPM
Drill Chuck Type......................................................................................................................... JT3 Key Chuck
Drill Chuck Size......................................................................................................................................... 5/8 in.
Other Specifications:
Country Of Origin ................................................................................................................................................ China
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ................................................................................................................Data Label on Head
Awards .............................................................................. Popular Woodworking Editor's Choice Tool Buying Guide
Assembly Time ........................................................................................................................................... 45 minutes
Features:
Table Has Lock Levers and Coolant Trough
Crank Handle Operated Rack and Pinion Vertical Table Movement
Threaded Depth Stop
Cushioned Grip Quill Handles
Three T-Slots Accommodates 1/2" Clamping Kit
Includes Built-in Light
Table and Base are Cast Iron
1/8" - 5/8" Chuck
Huge 4-3/4" Spindle Travel
12 Speeds
1-1/2HP Motor
MT #4 Spindle Taper