Grizzly G7947 - Manual (Page 16)

-14-
G7947/G7948 12 Speed Floor Drill Press
The Model G7947/G7948 was carefully packed
when it left our warehouse. If you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
Set Up Safety
SECTION 3: SET UP
The Model G7947/G7948
is a heavy machine. DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Wrench 18 mm ........................................... 1
• Plumb Bob .................................................. 1
• People for Lifting Help ................................ 2
• Rubber Mallet ............................................. 1
• 60W Light Bulb (110V operation only) ....... 1
• Permanent Marker ...................................... 1
Items Needed for
Set Up