Gold's Gym GGTL80608.0 User Manual

Page 8

6. Set the Left Upright Spacer (76) on the Base

(83). Have a second person hold the Left

Upright (74) near the Base. Hold a Bolt Spacer

(80) inside the lower end of the Left Upright.

Insert a 3/8" x 4" Bolt (6) with a 3/8" Star

Washer (9) into the Left Upright and the Bolt

Spacer. Repeat this step with a second Bolt

Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star

Washer (9). Then, set the Left Upright in the

Left Upright Spacer.

Partially tighten the 3/8" x 4" Bolts (6); do not

fully tighten the Bolts yet.

Press a Base Endcap (77) into the Base (83).

With the help of a second person, tip the tread-

mill so that the Base (83) is flat on the floor.

5. With the help of a second person, carefully tip

the treadmill onto its right side. Partially fold the

Frame (56) so that the treadmill is more stable;

do not fully fold the Frame yet.

Remove and discard the two indicated bolts (A)

and the shipping bracket (B).

Attach a Base Pad (81) to the Base (83) in the

location shown with a #8 x 1" Tek Screw (2) and

a Base Pad Spacer (13). Then, attach another

Base Pad (81) with only a #8 x 1" Tek Screw (2).

Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),

and the shipping bracket (C) from the Base (83).

Attach a Wheel (84) with the Bolt and the Nut

that you just removed. Do not overtighten the

Nut; the Wheel must turn freely. Discard the

shipping bracket.

4. Hold a Bolt Spacer (80) inside the lower end of

the Right Upright (78). Insert a 3/8" x 4" Bolt (6)

with a 3/8" Star Washer (9) into the Right

Upright and the Bolt Spacer. Repeat this step

with a second Bolt Spacer (80), 3/8" x 4" Bolt

(6), and 3/8" Star Washer (9). Then, set the

Right Upright in the Right Upright Spacer (79).

Be careful not to pinch the Upright Wire (38).

Partially tighten the 3/8" x 4" Bolts (6); do not

fully tighten the Bolts yet.

Press a Base Endcap (77) into the Base (83).