Garmin 240 User Manual
Page 35
27
Unit Operation
Setup Menu/Memory
Memory
The ‘Memory’ tab contains the settings for unit memory, allows you
to reset the unit to the factory setup and allows you to review software
version information. To access the ‘Memory’ tab, use the arrow keys to
highlight it.
Remember
The Fishfi nder 240 can be set to remember All of the unit settings
including the Adjustment Bar or the items in Setup Only.
To Select a Memory Setting:
1. Highlight the ‘Memory’ tab on the Setup Menu.
2. Highlight the ‘Remember’ fi eld and press ENTER.
3. Choose ‘All’ or ‘Setup Only’, press ENTER to accept the selection.
Factory Setup
To Restore the Factory Settings:
1. Highlight the ‘Memory’ tab on the Setup Menu.
2. Highlight the ‘Factory’ Setup button and press ENTER.
3. Choose ‘OK’ to reset the unit or ‘Cancel’ to abort.
Software Version
The ‘Software Version’ Button will report information about the current
software version in the unit, and display the ID Number.
To Activate the Software Version Window:
1. Highlight the ‘Memory’ tab on the Setup Menu.
2. Highlight the ‘Software Version’ button and press ENTER.
3. Press ENTER to close the information window.
Remember Selections
Software Version Information
Reset to Factory Settings
190-00155-10 Rev A.indd
08/16/00, 2:47 PM
27