Gardena Robitc Lawn Mower R40Li - Manual (Page 23)

English - 23
3. INSTALLATION
Slopes
The boundary wire can be laid across a slope that
slants less than 10 %.
The boundary wire should not be laid across a slope
that is steeper than 10 %. There is a risk of R40Li
finding it difficult to turn there. The mower will then
stop and show the fault message Outside working
area. The risk is at its greatest in damp weather
conditions, as the wheels can slip on the wet grass.
However, the boundary wire can be laid across a
slope steeper than 10 % when there is an obstacle
that R40Li can be permitted to collide with, for
example, a fence or a dense hedge.
R40Li can mow areas inside
the working area that slope up
to 25 cm per distance metre
(25 %). Areas that slope more
must be demarcated by the
boundary wire.
When any part of the working
area's boundary slopes more
than 10 cm per distance
metre (10 %), the boundary
wire must be routed about
20 cm in on flat ground before
the slope starts.
2