GPX SI108 - Manual (Page 5)

5
Docking an iPod
1. Adjust the spacer to the correct depth for the iPod to be docked.
When inserting an iPod nano (first or second generation), slide the Dock
connection on the unit so that it matches the opening on the iPod nano (first or
second generation).
. Connect the iPod to the iPod connector inside the Docking Station.
Once an iPod is connected to the Docking Station, the unit will play and charge
the docked iPod.
Please note, the unit must be powered by the DC Input in order for a docked iPod
to charge.
Playing an iPod
1. Dock an iPod onto the unit by following the directions under “Docking an iPod”.
. Adjust the Power Switch to the on position.
3. Use the docked iPod’s native controls to play, pause, skip, and search audio tracks.
Please note, if a device is connected via the Line Input, the audio from a docked
iPod will be cut.
4. Use the Volume Switch to adjust the volume of the unit
Using the Auxiliary Input
1. Plug one end of a 3.5 mm mini-phono cable (not included) or a 3.5 mm mini-
phono to RCA cable (not included) into the Line Input on the unit.
. Plug the other end of the cable into the audio output/headphone output on an Mp3
Player or Other Audio Source.
3. Adjust the Power Switch to turn the unit on.
4. Audio played from the Mp3 Player or Other Audio Source will now be heard on
the unit.
If connecting to the headphone output of an audio source, the source’s volume
controls may need to be adjusted for optimal sound.
Please note, if a device is connected via the Line Input, the audio from a docked
iPod will be cut.