Garmin 160 BLUE User Manual
Page 23
15
Unit Operation
Setup Menu: Chart Tab
SETUP MENU
The Setup Menu contains the unit settings that should not require
frequent change. The Setup Menu is divided into eight tabs: Chart, Tools,
Numbers, Alarms, System, Calibrations, Units, and Memory. Each tab will
be described in more detail in this section.
To enter and exit the Setup Menu, press the SETUP button on the face
of the unit. The first time that the SETUP button is pressed, the Setup
Menu will be displayed with the ‘Chart’ tab highlighted in black. Pressing
the UP or DOWN arrow will move the highlight between the tab selections.
Press the RIGHT arrow to access the selection fields. Each time the Setup
Menu is accessed, the unit will return to the last edited selection field. Press
the LEFT arrow key to get back to the tabs.
Chart Tab
The ‘Chart’ tab allows the user to determine the appearance of the
scrolling chart display. To access the ‘Chart’ tab, place the highlight over
it using the arrow keys.
Frequency
The ‘Frequency’ setting allows you to choose a transducer frequency.
Frequency refers to the “pitch” of the sound that the transducer sends and
receives. You may choose ‘200kHz’ (default), ‘50kHz’ or ‘Dual’ frequency.
Frequency Settings
Continued on page 16
FF 160 B Rev B.indd
12/13/01, 2:49 PM
15