Grizzly Extreme Duty Planners G9740 - Manual (Page 22)

-20- extreme duty planers
v-belt
avoid getting grease or oil on the v-belts or pul-
leys. Check the v-belts, as part of a monthly
inspection for proper tension and belt condition.
Cracking and glazing could result in belt failure.
replace the belt if such conditions appear.
to loosen/tighten belt tension:
1. thread in the motor mount adjustment bolts
( figure 23) to loosen the v-belt. unthread
the adjustment bolts to tighten the v-belt.
figure 21. transmission box grease fitting.
figure 22. table lifting gear grease fittings.
figure 23. motor mount adjustment bolts.
2. transmission box — lubricate after every
12 hours of continuous use. See figure 21
for location.
3. table lifting gears — once a week for
heavy use; once a month for moderate use.
See
figure 22 for locations.
4. chain — Clean and regrease as determined
by visible inspection for dust or grime in the
chain grease.
always wipe off excess grease from all loca-
tions after lubricating!