Grizzly H8071 - Manual (Page 3)

h8071 drill press lathe attachment
-3-
Sandpaper
Workpiece
Wrapping the sandpa-
per completely around
the workpiece will pull
your hands into the mov-
ing workpiece and may
cause injury. never wrap
sandpaper completely
around the workpiece!
eye/face protection. Wear eye protection
and a face shield during all turning operations.
respiratory protection. always wear a
respirator when using this tool. Wood dust may
cause allergies or long-term respiratory health
problems.
avoiding entanglement. Keep long hair and
loose clothing such as sleeves, belts, and jewelry
items away from the workpiece and chuck.
WorKpiece condition. always inspect the
condition of your workpiece. NEVEr turn stock
with knots, splits, and other potentially dangerous
conditions. all glued joints must have high quality
bonds that will not fly apart during operation.
mounting WorKpiece. Before starting, be
certain the drive and spur centers have been
properly imbedded into the workpiece, and that
the table is locked in place.
using tool rest. NEVEr attempt free-hand
turning, you must always support the chisel on the
tool rest, and keep the tool rest gap to
1 ⁄
8
" to 1 ⁄
2
"
when ever possible.
turning speed. select the correct tuning
speed for your work before starting the drill
press.
using sharp chisels. Keep chisels sharp.
dull chisels require more force to cut, causing tool
chatter and grabbing hazards.
material removal. attempting to remove too
much wood at once may cause the workpiece or
chisel to eject causing severe injury.
no list of safety guidelines can be complete.
every shop environment is different. always
consider safety first, as it applies to your
individual working conditions. use this and
other machinery with caution and respect.
failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
if you have never used this type of machine
or equipment before, We strongly rec-
ommend that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. regardless of the con-
tent in this section, grizzly industrial will
not be held liable for accidents caused by
lack of training.
operation safety
read and follow these safety precautions: