beautypg.com

Cast iron stoves t iron cas tove – Stovax STOV1008 User Manual

Page 3

background image

Every stove in this section is manufactured from cast iron. This is the traditional way of

making premium quality stoves due to the way cast iron diffuses heat. Another advantage

is that the iron can be cast more thickly in areas where greater strength is needed. It also

has sculptural qualities, allowing attractive designs to be cast into the stove panels.

Airtight Construction

All Stovax stove doors, except the Regency, have
airtight seals which permit airflows to be precisely
controlled. This allows both the heat output and
refuelling frequency to be varied and helps maximise
burning efficiency.

Perfect Flame Control

The triple air system in certain stoves also allows
complete control of the flame picture. From a deep
glow, with minimal flames, it takes only a few seconds
to fill the firebox with swirling flames from the fuel and
jets of flame from the cleanburn ports.

Enamelled Stoves

Enamel is a very thin coating of coloured glass which
is fired at over 800°C on to a metal surface.To achieve
its translucent and lustrous finish, each casting is
especially designed for enamelling and is coated and
fired twice. Enamel is an option on many stoves, and
available in the three colours shown opposite.

Wood and multi-fuel

lti

od and

Cast iron stoves

t iron

Cas

tove

4

Triple Air Systems
(Cleanburn technology)

Several Stovax stoves incorporate triple air systems to
provide a cleaner burn, greater thermal efficiency and
control of the flame picture as follows:

1

Airwash air is drawn down over the inside of the
window to keep the glass clean and clear.
It is also used as primary combustion air when
burning wood.

2

Primary air for use with solid fuel, also used

to start wood fires but not normally used once
a wood fire is burning.

3

Cleanburn secondary air is pre-heated as it passes
through a heat exchanger chamber within the

firebox. It is then drawn into the smokestream,
where it combusts unburnt hydrocarbons to
provide a cleaner burn and greater thermal

efficiency.

Matt Black

Midnight
Blue Enamel

Laurel Green
Enamel

Ivory
Enamel

Colour Options

1

2

3

5