beautypg.com

Operations, Before you begin using your tool – Grizzly Model G9911 User Manual

Page 6

background image

G9911 9" Angle Grinder

-4

-

Before You Begin

Using Your Tool

OPERATIONS

Operating this equipment has the
potential for flying debris to cause eye
injury. Always wear safety glasses or
goggles when operating equipment.
Everyday glasses or reading glasses
only have impact resistant lenses, they
are not safety glasses. Be certain the
safety glasses you wear meet the
appropriate standards of the American
National Standards Institute (ANSI).

The Model G9911 was specifically
designed for cutting, grinding and
polishing. Do not modify and/or use
this machine for any other purpose.
Modifications or improper use of
this tool will void the warranty. If you
are confused about any aspect of
this machine, DO NOT use it until
you have answered all your ques-
tions. Serious personal injury may
occur.

Inspect angle grinder before use. The

grinding wheel must be free of cracks,

chips and breaks. If there are any signs of

damage, discard the grinding wheel and

replace immediately.

Use extreme caution when operating this

tool. Always be aware of your surrounding

working area. Be sure to wear appropriate

eye protection and be sure to work at a

safe distance from others in the area.

Be sure to use the appropriate abrasive

and cutting wheels with this grinder. Use

only specified grinding wheels. The wheels

used by this grinder must be reinforced

fiber resin, with a safety linear velocity not

lower than 6,200 RPM.

Damaged wheels can break under normal

use, creating a dangerous situation that

could cause serious injury. If the integrity

of a wheel is in question, always replace

with a new one.

Do not apply excessive pressure to the

grinder while cutting, as breakage of the

wheel could occur. If the grinder begins to

stall, decrease pressure immediately. If the

wheel stops abruptly, turn the grinder off

immediately.

Always use wheel guard. The wheel guard

is an important part of the grinder. Do not

operate the grinder if the wheel guard has

been removed. Do not modify the wheel

guard or make the opening more than

180°.